Star series is the most powerful laser cutter and engraver, industrial laser engraving machine, almost all materials can be processed, versatile, simple to useProduct Specification:
Voiern laser cutter and engraver have powerful processing functions, visual operation and easy to learn , can meet almost all customer processing requirements.
The laser head of industrial laser engraving machine enclosed jet design protects the lens from dust and keeps the lens highly translucent.
With 57 stepper motors, the engraving speed of laser cutter and engraver can reach 1000mm/s and the cutting speed can reach 500mm/s.
Industrial laser engraving machine have stainless steel guide rail, moving slider bearing design, smaller friction coefficient, higher precision, faster operation with 57 motor.
From 400mm*600mm to 900*1600, it meets the requirements of various sizes of materials for the job format.
Voiern laser cutter and engraver remove the size limit of the processed material, so that the length of the material is increased to an infinite length
Industrial laser engraving machine increase the height of the Z axis to meet the height requirements of materials such as large volume and shape.
The famous brand conveyor belt be used in industrial laser engraving machine guarantees a longer service life. the high quality belt has less stretching and deformation so that the operation accuracy is not affected.
It can protect the lens from smoke pollution, ensure light transmission, remove excess heat and impurities, and prevent or reduce the possibility of scorch.
Voiern laser cutter and engraver use High-Quality imported lenses ensure more precise beam focusing, finer beam and longer life.
Industrial laser engraving machine use laser tubes of famous brand like RECI ,WEIJU , EFR ensures the stability of the light source and service life.
The V8 system sets a variable starting point for work, allowing you to work at any point within the working area
|Machine color||Blue-White, Gray-Yellow|
|Engraving thickness||2mm (depends on material)||2mm(depends on material)||2mm(depends on material)||2mm(depends on material)|
|Cutting thickness||2cm(depends on material)||2cm(depends on material)||2cm(depends on material)||2cm(depends on material)|
|Laser type||sealed CO2 laser tube||sealed CO2 laser tube||sealed CO2 laser tube||sealed CO2 laser tube|
|Cooling mode||water cooling protection system||water cooling protection system||water cooling protection system||water cooling protection system|
|Positioning way||red light positioning||red light positioning||red light positioning||red light positioning|
|Working platform||Honeycomb||Honeycomb||Honeycomb/Blade platform||Honeycomb/Blade platform|
|Power supply||AC220V/110V 50HZ||AC220V/110V 50HZ||AC220V/110V 50HZ||AC220V/110V 50HZ|
|Package||Standard plywood case||Standard plywood case||Standard plywood case||Standard plywood case|
|Control software||Coreldraw/RUIDA V8||Coreldraw/RUIDA V8||Coreldraw/RUIDA V8||Coreldraw/RUIDA V8|
FAQ Of laser cutter and engraver, industrial laser engraving machine
1. Connect computer to machine with date lines but it does not work.
A. Check the date lines, do not use long date lines.
B. Check the USB port, It works or not.
C. Check the date line and Softdog, make sure they all are plugged into computer.
2. Engraving depth of laser cutter and engraver is not uniform.
A. Close the machine and after 1 hour then start it and check if there is water in water pipe.
B. Check the light path, and adjust it( refer to vedio of adjusting light ).
3. Turn on the switch of industrial laser engraving machine, but is does not work.
A. Check the power lines, it is connecting or not.
B. Check the scram button, make sure it is closed.
4. The engraving thikness is small.
A. Adjust the light path to make sure the light is at the center.
B. Check the lens, and make sure they are clean.
5.Engraving blurred image.
A. Put the focusing mirror back or wrong focusing length, you should square the lens, adjust to the specified
6. Laser cutter and engraver has spark.
A. Poor electrical contact, or the air is too damp.You should connect the wire, clean the dust, keep air ventilate
7.Engraving dislocation or stop engraving.
A. Electrostatic interference with the motherboard or signal transmission error.You should install and check the
ground wire, update the data cable or change the computer.
8.The laser head of industrial laser engraving machine not has light
There are 4 points to be check:
A. Check electric current.Press“TEST”button on machine screen board. If there is not electric current showed on
screen board,you should try to make sure all wires are connected well. If there is electric current showed on
screen board, maybe the lens is broken, laser tube light exit and lens are contaminated. Or the light path off set.
B. Check water cycle. If there is not water cycle, maybe the water pump damage. If there is water cycle, please
check whether the inlet and outlet are connected in reverse,or pipe fractures.
C. If a dot emit light.If there is not a light, please check the wire between the engraving machine control board
and the power supply is in good contact.
D. If above is no problem, maybe machine power damages, you should repair it.
More about laser cutter and engraver, industrial laser engraving machine, please contat to us